KCXZ Sanitary Bottom-Mounted Magnetic Agitator

Информация

186 9 марта 2023 в 11:43 (до 19.01.2038) keanzl

• E-mail: bjkean208@gmail.com
• Адрес сайта: https://www.keanzl.com/bottom-mounted/kcxz-sanitary-bottom-mounted-magnetic-agitator.html

KCXZ Sanitary Bottom-Mounted Magnetic Agitator
Paddle agitators consist of two flat paddle-shaped impeller blades extending to reach the tank walls. They are used if no extensive axial and radial flow is required. These impellers can produce a laminar low shear flow and are used for low viscosity liquid mixing, crystallization, dissolution, and heat transfer. They are typically operated at low speeds and predominantly give a tangential flow pattern. Secondary blades can be installed on the paddle blades to enhance the mixing of more viscous materials.The impeller blades are inclined from the plane of rotation to create an axial flow pattern. This variation of paddle agitator is typically used for homogenizing suspensions.
Paddle Agitator Mixers generally used for large scale equipment, such as polymerization tank, PVC reactor, saccharifying tank, gelatinization reactor etc. The stirring device is installed at the bottom of cylinder or tank equipment , the mixer shaft is shortened and there is no coupling between mixer shaft and transmission shafts, which improve the stability of shaft. At the same time, the stress state of head of the tank is improved, and the installation requirements are also reduced. Paddle Agitator Mixer is also beneficial for mixing of materials in the bottom, which can get full mixing of all material.Paddle Agitator Mixers are good choices for outputs from bottom of tank , which can make the discharge port mixing well.  Bottom entry agitator are designed to fit into the bottom or side of a mixing vessel. These high shear Paddle Agitator Mixers are typically used in conjunction with a slow speed anchor stirrer or scraper unit for high viscosity products.
KEAN’s KCXZ series of Paddle Agitator Mixers are designed to fit into the bottom or side of a mixing vessel. These high shear mixers are typically used in conjunction with a slow speed anchor stirrer or scraper unit for high viscosity products. The KCXZ Paddle Bottom Entry mixer gives high shea